Maintenance Agreements -- “The Smart Choice”
Heating and cooling systems have a way of breaking down when the weather is at its worst; on the coldest day of a frigid winter, or during a sizzling summer heat wave; times when your comfort system must work the hardest, and when you need it most.
Regular check-ups will help to maximize the life expectancy of your system; unfortunately, even the best maintenance won't prevent normal wear and tear.
Your investment in our Blue Ribbon Plan includes:
Two Performance Tune-Ups Per Year
Having your system checked regularly enables us to keep your unit running as efficiently as possible, which saves you money on your utility bill month after month. These regular check-ups also enables us to catch problems such as loose or burnt wires, and freon leaks, before they lead to a larger problem such as motor failure.
Click here to view our performance tune-up checklist.Priority Service
When you have an emergency, you can rest assured Shelby Heating & Air Conditioning, Inc....WILL BE THERE! Our commitment to program customers means we will have a technician to your door within 24 hours of calling our office.
15% Off Replacement Parts
Example of savings: if the cost of a blower motor replacement was $400, you would save $60 on the repair.
15% Off Repair Labor
Our discounted rates save you money with every service call. Our repair trucks are fully stocked so we are able to repair 99% of calls on the first visit.
Service Repair Warranty
Replacement parts and associated labor are warranted for 1 YEAR. There will be no charge to come back out and diagnose the same problem. We stand behind our work. Many service companies only provide 30, 60 or 90-day warranties.
Energy Saving Coil Cleaning
Dirty coils reduce efficiency and cause your unit to work harder, causing parts to wear out faster, and shorten the life expectancy of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Test performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21%. Since the average homeowner's heating and cooling bill is $1,500 per year, a 21% loss in efficiency means you could be wasting up to $315 each year.
Our Maintenance Agreement
Our Maintenance Agreement also includes cleaning condensate drain pan and indoor fan.
$300 Off New System Purchases
If or when it's time for a new energy-efficient unit, you receive $300 off the complete installation. The average unit today is over $5000 installed. The savings typically pays for the initial cost of the service agreement.
Performance Furnace Tune-Up
- Inspect burner assembly
- Inspect ignition assembly
- Inspect blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls
- Tighten electrical connections
- Calibrate thermostat
- Check flue draft
- Check combustion
- Inspect vent piping
- Inspect humidification system
Performance Air Conditioner Tune-Up
- Inspect condenser coil
- Inspect evaporator coil if accessible
- Inspect condensate drain
- Inspect blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
Performance Air Handler Tune-Up
- Inspect evaporator coil
- Inspect blower motor
- Inspect filtration system
- Adjust blower components
- Lubricate moving parts as required
- Test and adjust safety controls
- Tighten electrical connections
- Calibrate thermostat
- Inspect humidification system
- Inspect electrical heating elements
Performance Heat Pump Tune-Up
- Inspect condenser coil
- Inspect condensate drain
- Check defrost controls
- Inspect auxiliary heaters
- Inspect filtration system
- Lubricate moving parts as required
- Inspect for refrigerant leaks
- Test condensate pump
- Tighten electrical connections
- Test starting capabilities
- Measure air temperature differential
- Monitor refrigerant pressure
- Measure amperage and voltage
Please contact us to discuss our maintenance agreements in more detail. We offer multi-year discounts and will recommend a program that best fits your needs.